Skip to content

Avail special discounts on our products this Father's day


    WATCH A GUIDE TO BIKE PUMP WITH JIM

    High Pressure Mini Pump w/Gauge

    $29.98
    Unit price  per 
    • Quick Pumping Power & Accurate Inflation
    • Super Tight Presta
    • No Pump Rattles

    Buy now to receive in 3 - 5 days

    Warranty for products purchased directly from us

    • Quick Pumping Power & Accurate Inflation
    • Super Tight Presta
    • No Pump Rattles

    Buy now to receive in 3 - 5 days

    Warranty for products purchased directly from us

    WATCH A GUIDE TO BIKE PUMP WITH JIM

    AWARD WINNERS

    'Best Buy Award Winner' by Outdoor Gear Lab, Pro Bike Tool are Amazon verified experts

    SPEEDY PUMP

    Fast air pumping power & accurate bicycle tire inflation. 100 psi / 6.9 bar

    INTEGRATED PRESSURE GAUGE

    Integrated pressure gauge to accurately pump to the tire air pressure that suits your ride

    PRO QUALITY

    Durable, compact & lightweight, for expert cyclists and new riders alike

    PRESTA & SCHRADER VALVES

    Super tight Presta & Schrader connection - no leaks

    SECURE BRACKET

    NEW: secure cycling frame mount holder with extra security strap

    weight

    4.5 ounces / 128g

    dimension

    8.8 x 1 x 1 inches / 22 x 2.5 x 2.5 cm

    material

    Aluminium Alloy
    The hose is stored within the pump itself. You can access this by lifting the cap at the handle end of the pump and pulling out the hose within. You then screw the relevant end of the hose into the body of the pump. It will then be ready to use.
    The frame of your bicycle will need pre-drilled holes in the frame. There should already be bolts screwed into these holes. To install the bracket, ensure the threads on the mounting bolts are clean of debris, paint and metal chips, next, add a thin film of grease. You then line up the bracket with the holes, and hand tighten the bolts using a screwdriver or hex key. Be careful not to cross thread the bolts!
    Yes, but you will need to ensure that the removable element is fully screwed into the valve so that it does not twist and come loose when you screw the pump hose onto the valve. If this does not work, you could also consider superglueing the core into the valve.
    You should ensure that the presta valves are fully open, and then screw the hose valve head deeply onto the tire valve. This creates a full seal, allowing all the air to be pushed through when pumping. If a full seal is not created, then the air will sometimes get trapped in the pump. This will cause a β€˜backup’ of air making pumping difficult, and in some cases the pump will heat up as the air has nowhere to go.
    High Pressure Mini Pump w/Gauge
    local_offer

    Customer Reviews

    Based on 1769 reviews
    83%
    (1477)
    15%
    (262)
    1%
    (21)
    0%
    (7)
    0%
    (2)
    C
    Chad McKell

    High Pressure Mini Pump w/Gauge

    E
    EmJay
    Take it on every ride.

    Small, light and doesn't take too long fill an empty tire. It can be a little tricky connecting it properly but this is a minor complaint because it rarely happens. Very small and love that it can be used for both types of tire connections.

    K
    Kevin R
    Works okay but would prefer a different mounting position

    While I also carry a CO2 inflator, I like to have a small light weight pump handy for topping off and as a backup once you use the CO2 on hand. There were a couple of issues with the mounting. The mount is designed for a round tube so didn't conform to the post on my bike. Also, the mount is designed so the pump extends below the bottle cage which I didn't like. I prefer to have the pump tucked in beneath the bottle cage and bottle so I flipped the mount around. The strap seems to hold well so I'm not too concerned about the pump falling off. I tested the pump and it pushes a decent amount of air but, as with all these types of small pumps, you can plan on getting a bit of a workout pumping up to pressure.