Skip to content

Avail special discounts on our products this Father's day


    WATCH A GUIDE TO CO2 INFLATOR WITH JIM

    CO2 Inflator

    $19.98
    Unit price  per 
    • Presta and Schrader Valve Compatible
    • No Frozen Fingers
    • Rubber EVA Foam sleeve

    Buy now to receive in 3 - 5 days

    Warranty for products purchased directly from us

    • Presta and Schrader Valve Compatible
    • No Frozen Fingers
    • Rubber EVA Foam sleeve

    Buy now to receive in 3 - 5 days

    Warranty for products purchased directly from us

    WATCH A GUIDE TO CO2 INFLATOR WITH JIM

    FAST PUMP

    Super fast & reliable bicycle tire inflation

    POCKET SIZE

    Small, compact & lightweight design to carry easily on every ride

    EASY CONTROL

    Control lever operation regulates speed of CO2 release

    TWIN VALVE

    Twin valve head threads onto presta & schrader valves

    weight

    1.06 ounces / 30g

    dimension

    2 x 1 x 1.4 inches / 5 x 2.5 x 3.5 cm

    material

    Aluminium Alloy
    For safety reasons, we do not recommend screwing the CO2 cartridge into the inflator head until required, in order to prevent CO2 from being dispensed while in storage.
    Once you have achieved your desired tire pressure, any residual gas in the cartridge should be fully emptied for safety reasons.
    Most threadless presta valves have a small screw / threaded section at the very top of the valve stem, which should work with the Pro Bike Tool CO2 inflator. If you purchase the inflator and it is not compatible, send us a message and we will advise you.
    The CO2 inflator is compatible with both presta and schrader valves, as the force of the gas expelled from the inflator head forces the valve open.
    Yes, but you will need to ensure that the removable element is fully screwed into the valve so that it does not become loose under the pressure of the gas and potentially waste any of the content of your cartridge.
    This depends on both the cartridge size and the type of tire. Refer to the chart below to find out what pressures can be achieved. Bear in mind that CO2 gas slowly dissipates through rubber over time. As such, you will find that the standard tire pressure will reduce slightly as the gas dissipates. We therefore recommend that you refill your tires with normal air using a conventional bike pump after your ride.
    The CO2 inflator head supplied with the foam sleeve fits any size of threaded CO2 cartridge (12g, 16g, 20g, 25g). However the foam sleeve included is designed to only fit over a 16g threaded CO2 cartridge.
    A spare o-ring is included as a replacement for both of the o-rings that are inside the inflator - the one in the nozzle that connects to the tire valve, and the one in the end that you screw the co2 cartridge into. If either of the current o-rings wear out, you may simply insert the new one.
    CO2 Inflator
    local_offer

    Customer Reviews

    Based on 1691 reviews
    89%
    (1503)
    10%
    (171)
    1%
    (10)
    0%
    (5)
    0%
    (2)
    J
    JT
    One time use only…left me stranded after that

    Piece that punctures the cartridge missing after only one use. Didn’t work for me the second time I tried to use it since the piece to picture was missing, leaving me stranded and frustrated for quite a while…

    C
    Carlos Franco
    Great tool for quick flat fix on the trail.

    Great tool for quick flat fix on the trail.

    G
    Gab2712

    Muy buen producto, lo compre para ver si valia la pena y es super bueno. Lo necesité y funciono como esperaba. Recomended